AgrowDose™ AD Peristaltic Dosing Pumps

AgrowDose "AD" peristaltic pumps are controlled by discrete 24Vdc inputs for operation by GC-Pro/XL controllers and PLC's.

A U-shaped piece of tubing is squeezed by rotating rollers to create suction on one end of the tube and pressure on the other end creating a self-priming, non-contact design. Fluid stays inside of the FDA approved tubing and makes no contact with other parts of the pump.

AgrowDoseTM AD1

Dosing pump is a rugged and economical single-head peristaltic pump designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 20psi. Pump heads feature an intlet tube and an outlet tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids. AD1 Pump operates at a fixed speed (~50mL/min) when powered and requires a controlled outlet to operate the pump (such as RX1.) Includes a standard 120Vac/12Vdc wall plug power supply for use on any control system with a relay-controlled outlet.

AgrowDoseTM AD2

Dosing pump is a rugged and economical dual-head peristaltic pump designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 20psi. Pump heads feature an intlet tube and an outlet tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids. AD2 pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller such as the GC-Pro or GC-ProXL. Built-in relays switch power from the included 12Vdc wall adapter to the pump motors.

AgrowDoseTM AD4

Dosing pump is a rugged and economical quad-head peristaltic pump designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 20psi. Pump heads feature an intlet tube and an outlet tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids. AD4 pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller such as the GC-Pro or GC-ProXL. Built-in relays switch power from the included 12Vdc wall adapter to the pump motors.

Replacement AgrowDose™ AD Peristaltic Pump Head

Easy-change replacement pump head for AgrowDose persitaltic pumps (does not include motor.) Head replacement can be done in seconds and does not require any tools. Simply rotate the head counter-clockwise 1/8 turn and remove. Install the new head onto the pump shaft, align and rotate to lock into place.



Related Items